If you think that playing music through your microphone is impossible, then you might be wrong. With the advent of technology, almost anything has become possible. You just need to know the correct procedure to do this.

Therefore, if you’re looking for a great way to play audio effects or music while talking through your microphone like the Youtuber then this article will surely help you out.

5 Methods To Play Music Through Mic

1. VoiceMeeter and Soundbar

Step 1

• The first thing that you need to do is to download and install the VoiceMeeter and Soundbar applications. You can find them online.

Step 2

• Next, you need to do is to connect them to your cellphone or PC. Make sure that you can enable the input and the output.

Step 3

• You can go ahead and start and then go to the settings and System. Here you will find the Sound Control Panel option. Just click on enable.

Step 4

• You can now follow it up to the Soundboard app. Open it then go to the VoiceMeeter Input. Select the available output option.

Step 5

• When you are done, you will need to configure the first Hardware input and then select the option as Microphone. That way you can get the best audio settings that will work.

Step 6

• The most important step that you need to do is to keep an eye on the target program and the input device. Make sure that they are plugged in each of the settings that will allow you to use the physical Microphone.

2. Using Virtual Audio Cable and Soundboard

The step of using the Virtual Audio Cable and Soundboard is also another process that you can follow for the best results. However, the process of using the Virtual Audio Cable and Soundboard is very limited and can be achieved with a few available microphones. You can follow the steps below to get the details.

Step 1

• To do this, the first thing that you need to get both the Virtual Audio Cable and Soundboard. Make sure you have downloaded and configured the VAC drivers.

Step 2

• Go to the Control panel and follow the Sound menu available on your PC. Here, you will find the recording devices option. Check for the Cable Output available option and then enable it.

Step 3

• Once you are done, you can now go to DC and SB. Proceed it up to the settings page where you will be allowed to configure. Here, you can choose the main speakers. You can choose the output option like the microphone.

Step 4

• Once you are done, you need to open the Recording Tab where you will open the Sound settings in the device. Modify the changes according to your needs and then click on the ‘Listen to this device’ option which will allow you to listen through the Mic.

3. Using Stereo Mix

If you are likely to be using the Stereo Mix, this is probably the easiest option that you could have. In fact, the steps are very simple and easily allow you to connect with the Mic and play music. But it is limited to a very simple function that you can follow the steps mentioned below:

Step 1

• Connect the Microphone properly to the PC and then you need to open the Stereo Mix control panel. You can just keep going to the control settings of the sound.

Step 2

• In the default setting, you cannot see the connected Mic because it is hidden. Therefore, you may need to right-click this option and find the disabled devices that are connected to the product.

Step 3

• The next step that you need to go to is the Stereo Mix option. Now you can find the different options available. Just click on the Enable Stereo Mix option.

Step 4

• When you are done with that you can now go to the available default option, click on Set as Default and this will change the input and output, this will also change the configuration settings in each case.

Step 5

• If you are doing this for the first time, you may experience problems with the connectivity and configuration settings. This is where you may need to fix the sounds to find out the problem with the microphone.

4. Using a Voice Changer

Using a voice changer is not that difficult at all if you want to play the music through the microphone. These may not be the hardest options available, but they do require the help of commercial software to get the job done.

There is some commercial software out there today, including MorphVox Pro and Soundpad, that you can use to get a proper response. This will help you get the appropriate updates for your devices. You have evidence to help you get a correct answer and the right details.

The steps for using the MorphVox Pro are not difficult at all and all that you need to do are to follow the few steps mentioned below:

Step 1

• Connect your Microphone to the MorphVox Pro application and make sure it is connected.

Step 2

• Go to the available audio Menu and then look for the hidden connections.

Step 3

• Select the available Microphone option and then click on it to complete the connectivity.

Step 4

• Now you have to change the settings of the connected input and output devices. You can select directly on the microphone in the audio output or even follow the operating instructions to change the settings.

5. Playing In Discord

Many people think that this could be another option if you want to get the most out of your music listening options. In fact, it can be if you just know the right process for doing it. Playing Discord music can be done with a microphone and without a microphone.

You may not need to buy a formatted microphone to do this as well. Just a few steps will do the job for you. These are some of the steps you can take below.

Step 1

• To get things set up you will need the help of a VB cable. Just connect it to the PC and then you can download a suitable driver for it.

Step 2

• When you’re done, just install the driver and then you can open the sound driver on your PC. Find the existing recording devices and then click the Show Disabled Devices option to go to the next step.

Step 3

• Here is the list of all the existing devices, just look for the Cable exit option, if it is hidden; you need to right-click on the device and then enable it again.

Step 4

• Go to the Discord account and here you need to create another account, launch the main Discord account in the desktop app and then open a new account using the web browser.

Step 5

• Now just set the audio output of the secondary account using the cable input option. This allows your microphone to play music directly. Configure the language settings accordingly and you are good to go.

To Sum Up

It is not a difficult task at hand to play music through the mic and talk. Though the process is not complex, there are many different ways by which you can get it done. I hope this guide will help you to get the best results that you are looking forward to playing music through Mic.

All the methods mentioned above are very useful.

FAQ’s

How do I play music through my mic?

In addition, you can play audio through the mic by changing your default microphone to your system sounds. You can do this by following the steps below.

• Go to Control Panel and clicking Hardware & Sound.
• Next is you should click Manage Audio Devices and choose Recording.
• Then allow Stereo Mix and set it to the default mic.

How do I play music through my mic Windows 10?

You can play music through your mic Windows 10 by following the steps below:

• Press ‘Windows + I’m on your keyboard to launch the settings app.
• Now click on the search bar at the top and type ‘mic’.
• Click and launch ‘Microphone Privacy Settings’.
• Under the ‘Allow access to the microphone on this device’ section, ensure that it says ‘Microphone access for this device is on’.